But for all that, the use of water, as the
predominant
motive power, was beset with difficulties.
Marx - Capital-Volume-I
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
.
?
[For the workman must wait upon the work; it will not wait upon his leisure and allow itself to be done in a spare moment.
-- Yes, he must,-- So the conclusion is that more will be produced of every thing and the work will be more easily and better done, when every man is set free from all other occupations to do, at the right time, the one thing for which he is naturally fitted.
] (Rep.
1.
2.
Ed.
Baiter, Orelli, &c.
) So in Thucydides, l.
c.
, c.
142: --Seafaring is an art like any other, and cannot, as circumstances require, be carried on as a subsidiary occupation; nay, other subsidiary occupations cannot be carried on alongside of this one.
?
If the work, says Plato, has to wait for the labourer, the critical point in the process is missed and the article spoiled, [--?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
.
?
[If someone lets slip .
.
.
] The same Platonic idea is found recurring in the protest of the English bleachers against the clause in the Factory Act that provides fixed mealtimes for all operatives.
Their business cannot wait the convenience of the workmen, for --in the various operations of singeing, washing, bleaching, mangling, calendering, and dyeing, none of them can be stopped at a given moment without risk of damage .
.
.
to enforce the same dinner hour for all the workpeople might occasionally subject valuable goods to the risk of danger by incomplete operations.
?
Le platonisme ou` va-t-il se nicher!
[Where will Platonism be found next!
]
58 Xenophon says, it is not only an honour to receive food from the table of the King of Persia, but such food is much more tasty than other food. --And there is nothing wonderful in this, for as the other arts are brought to special perfection in the great towns, so the royal food is prepared in a special way. For in the small towns the same man makes bedsteads, doors, ploughs, and tables: often, too, he builds houses into the bargain, and is quite content if he finds custom sufficient for his sustenance. It is altogether impossible for a man who does so many things to do them all well. But in the great towns, where each can find many buyers, one trade is sufficient to maintain the man who carries it on. Nay, there is often not even need of one complete trade, but one man makes shoes for men, another for women. Here and there one man gets a living by sewing, another by cutting out shoes; one does nothing but cut out clothes, another nothing but sew the pieces together. It follows necessarily then, that he who does the simplest kind of work, undoubtedly does it better than anyone else. So it is with the art of cooking. ? (Xen. Cyrop. I. viii. , c. 2. ) Xenophon here lays stress exclusively upon the excellence to be attained in use-value, although he well knows that the gradations of the division of labour depend on the extent of the market.
59 He (Busiris) divided them all into special castes . . . commanded that the same individuals should always carry on the same trade, for he knew that they who change their occupations become skilled in none; but that those who constantly stick to one occupation bring it to the highest perfection. In truth, we shall also find that in relation to the arts and handicrafts, they have outstripped their rivals more than a master does a bungler; and the contrivances for maintaining the monarchy and the other institutions of their State are so admirable that the most celebrated philosophers who treat of this subject praise the constitution of the Egyptian State above all others. (Isocrates, Busiris, c. 8. )
? ? 256 Chapter 14
60 Cf. Diodorus Siculus.
61 Ure, l. c. , p. 20.
62 This is more the case in England than in France, and more in France than in Holland.
? ? Chapter 15: Machinery and Modern Industry
Section 1 : The Development of Machinery
John Stuart Mill says in his --Principles of Political Economy":
--It is questionable if all the mechanical inventions yet made have lightened the day's toil of any human being. ? 1
That is, however, by no means the aim of the capitalistic application of machinery. Like every other increase in the productiveness of labour, machinery is intended to cheapen commodities, and, by shortening that portion of the working day, in which the labourer works for himself, to lengthen the other portion that he gives, without an equivalent, to the capitalist. In short, it is a means for producing surplus value.
In manufacture, the revolution in the mode of production begins with the labour-power, in modern industry it begins with the instruments of labour. Our first inquiry then is, how the instruments of labour are converted from tools into machines, or what is the difference between a machine and the implements of a handicraft? We are only concerned here with striking and general characteristics; for epochs in the history of society are no more separated from each other by hard and fast lines of demarcation, than are geological epochs.
Mathematicians and mechanicians, and in this they are followed by a few English economists, call a tool a simple machine, and a machine a complex tool. They see no essential difference between them, and even give the name of machine to the simple mechanical powers, the lever, the inclined plane, the screw, the wedge, &c. 2 As a matter of fact, every machine is a combination of those simple powers, no matter how they may be disguised. From the economic standpoint this explanation is worth nothing, because the historical element is wanting. Another explanation of the difference between tool and machine is that in the case of a tool, man is the motive power, while the motive power of a machine is something different from man, as, for instance, an animal, water, wind, and so on. 3 According to this, a plough drawn by oxen, which is a contrivance common to the most different epochs, would be a machine, while Claussen's circular loom, which, worked by a single labourer, weaves 96,000 picks per minute, would be a mere tool. Nay, this very loom, though a tool when worked by hand, would, if worked by steam, be a machine. And since the application of animal power is one of man's earliest inventions, production by machinery would have preceded production by handicrafts. When in 1735, John Wyatt brought out his spinning machine, and began the industrial revolution of the 18th century, not a word did he say about an ass driving it instead of a man, and yet this part fell to the ass. He described it as a machine --to spin without fingers. ? 4
All fully developed machinery consists of three essentially different parts, the motor mechanism, the transmitting mechanism, and finally the tool or working machine. The motor mechanism is that which puts the whole in motion. It either generates its own motive power, like the steam- engine, the caloric engine, the electromagnetic machine, &c. , or it receives its impulse from some already existing natural force, like the water-wheel from a head of water, the wind-mill from wind, &c. The transmitting mechanism, composed of fly-wheels, shafting, toothed wheels, pullies, straps, ropes, bands, pinions, and gearing of the most varied kinds, regulates the motion, changes its form. where necessary, as for instance, from linear to circular, and divides and distributes it among the working machines. These two first parts of the whole mechanism are
? 258 Chapter 15
there, solely for putting the working machines in motion, by means of which motion the subject of labour is seized upon and modified as desired. The tool or working machine is that part of the machinery with which the industrial revolution of the 18th century started. And to this day it constantly serves as such a starting-point, whenever a handicraft, or a manufacture, is turned into an industry carried on by machinery.
On a closer examination of the working machine proper, we find in it, as a general rule, though often, no doubt, under very altered forms, the apparatus and tools used by the handicraftsman or manufacturing workman; with this difference, that instead of being human implements, they are the implements of a mechanism, or mechanical implements. Either the entire machine is only a more or less altered mechanical edition of the old handicraft tool, as, for instance, the power- loom,5 or the working parts fitted in the frame of the machine are old acquaintances, as spindles are in a mule, needles in a stocking-loom, saws in a sawing-machine, and knives in a chopping machine. The distinction between these tools and the body proper of the machine, exists from their very birth; for they continue for the most part to be produced by handicraft, or by manufacture, and are afterwards fitted into the body of the machine, which is the product of machinery. 6 The machine proper is therefore a mechanism that, after being set in motion, performs with its tools the same operations that were formerly done by the workman with similar tools. Whether the motive power is derived from man, or from some other machine, makes no difference in this respect. From the moment that the tool proper is taken from man, and fitted into a mechanism, a machine takes the place of a mere implement. The difference strikes one at once, even in those cases where man himself continues to be the prime mover. The number of implements that he himself can use simultaneously, is limited by the number of his own natural instruments of production, by the number of his bodily organs. In Germany, they tried at first to make one spinner work two spinning-wheels, that is, to work simultaneously with both hands and both feet. This was too difficult. Later, a treddle spinning-wheel with two spindles was invented, but adepts in spinning, who could spin two threads at once, were almost as scarce as two-headed men. The Jenny, on the other hand, even at its very birth, spun with 12-18 spindles, and the stocking-loom knits with many thousand needles at once. The number of tools that a machine can bring into play simultaneously, is from the very first emancipated from the organic limits that hedge in the tools of a handicraftsman.
In many manual implements the distinction between man as mere motive power, and man as the workman or operator properly so called, is brought into striking contrast. For instance, the foot is merely the prime mover of the spinning-wheel, while the hand, working with the spindle, and drawing and twisting, performs the real operation of spinning. It is this last part of the handicraftsman's implement that is first seized upon by the industrial revolution, leaving to the workman, in addition to his new labour of watching the machine with his eyes and correcting its mistakes with his hands, the merely mechanical part of being the moving power. On the other hand, implements, in regard to which man has always acted as a simple motive power, as, for instance, by turning the crank of a mill,7 by pumping, by moving up and down the arm of a bellows, by pounding with a mortar, &c. , such implements soon call for the application of animals, water8 and wind as motive powers. Here and there, long before the period of manufacture, and also, to some extent, during that period, these implements pass over into machines, but without creating any revolution in the mode of production. It becomes evident, in the period of modern industry, that these implements, even under their form of manual tools, are already machines. For instance, the pumps with which the Dutch, in 1836-7, emptied the Lake of Harlem, were constructed on the principle of ordinary pumps; the only difference being, that their pistons were driven by cyclopean steam-engines, instead of by men. The common and very
? 259 Chapter 15
imperfect bellows of the blacksmith is, in England, occasionally converted into a blowing-engine, by connecting its arm with a steam-engine. The steam-engine itself, such as it was at its invention, during the manufacturing period at the close of the 17th century, and such as it continued to be down to 1780,9 did not give rise to any industrial revolution. It was, on the contrary, the invention of machines that made a revolution in the form of steam-engines necessary. As soon as man, instead of working with an implement on the subject of his labour, becomes merely the motive power of an implement-machine, it is a mere accident that motive power takes the disguise of human muscle; and it may equally well take the form of wind, water or steam. Of course, this does not prevent such a change of form from producing great technical alterations in the mechanism that was originally constructed to be driven by man alone. Now-a- days, all machines that have their way to make, such as sewing-machines, bread-making machines, &c. , are, unless from their very nature their use on a small scale is excluded, constructed to be driven both by human and by purely mechanical motive power.
The machine, which is the starting-point of the industrial revolution, supersedes the workman, who handles a single tool, by a mechanism operating with a number of similar tools, and set in motion by a single motive power, whatever the form of that power may be. 10 Here we have the machine, but only as an elementary factor of production by machinery.
Increase in the size of the machine, and in the number of its working tools, calls for a more massive mechanism to drive it; and this mechanism requires, in order to overcome its resistance, a mightier moving power than that of man, apart from the fact that man is a very imperfect instrument for producing uniform continued motion. But assuming that he is acting simply as a motor, that a machine has taken the place of his tool, it is evident that he can be replaced by natural forces. Of all the great motors handed down from the manufacturing period, horse-power is the worst, partly because a horse has a head of his own, partly because he is costly, and the extent to which he is applicable in factories is very restricted. 11 Nevertheless the horse was extensively used during the infancy of modern industry. This is proved, as well by the complaints of contemporary agriculturists, as by the term --horse-power,? which has survived to this day as an expression for mechanical force.
Wind was too inconstant and uncontrollable, and besides, in England, the birthplace of modern industry, the use of water power preponderated even during the manufacturing period. In the 17th century attempts had already been made to turn two pairs of millstones with a single water-wheel. But the increased size of the gearing was too much for the water power, which had now become insufficient, and this was one of the circumstances that led to a more accurate investigation of the laws of friction. In the same way the irregularity caused by the motive power in mills that were put in motion by pushing and pulling a lever, led to the theory, and the application, of the fly- wheel, which afterwards plays so important a part in modern industry. 12 In this way, during the manufacturing period, were developed the first scientific and technical elements of Modern Mechanical Industry. Arkwright's throstle spinning mill was from the very first turned by water.
But for all that, the use of water, as the predominant motive power, was beset with difficulties. It could not be increased at will, it failed at certain seasons of the year, and, above all, it was essentially local. 13 Not till the invention of Watt's second and so-called double-acting steam- engine, was a prime mover found, that begot its own force by the consumption of coal and water, whose power was entirely under man's control, that was mobile and a means of locomotion, that was urban and not, like the waterwheel, rural, that permitted production to be concentrated in towns instead of, like the water-wheels, being scattered up and down the country,14 that was of universal technical application, and, relatively speaking, little affected in its choice of residence by local circumstances. The greatness of Watt's genius showed itself in the specification of the
? 260 Chapter 15
patent that he took out in April, 1784. In that specification his steam-engine is described, not as an invention for a specific purpose, but as an agent universally applicable in Mechanical Industry. In it he points out applications, many of which, as for instance, the steam-hammer, were not introduced till half a century later. Nevertheless he doubted the use of steam-engines in navigation. His successors, Boulton and Watt, sent to the exhibition of 1851 steam-engines of colossal size for ocean steamers.
As soon as tools had been converted from being manual implements of man into implements of a mechanical apparatus, of a machine, the motive mechanism also acquired an independent form, entirely emancipated from the restraints of human strength. Thereupon the individual machine, that we have hitherto been considering, sinks into a mere factor in production by machinery. One motive mechanism was now able to drive many machines at once. The motive mechanism grows with the number of the machines that are turned simultaneously, and the transmitting mechanism becomes a wide-spreading apparatus.
We now proceed to distinguish the co-operation of a number of machines of one kind from a complex system of machinery.
In the one case, the product is entirely made by a single machine, which performs all the various operations previously done by one handicraftsman with his tool; as, for instance, by a weaver with his loom; or by several handicraftsman successively, either separately or as members of a system of Manufacture. 15 For example, in the manufacture of envelopes, one man folded the paper with the folder, another laid on the gum, a third turned the flap over, on which the device is impressed, a fourth embossed the device, and so on; and for each of these operations the envelope had to change hands. One single envelope machine now performs all these operations at once, and makes more than 3,000 envelopes in an hour. In the London exhibition of 1862, there was an American machine for making paper cornets. It cut the paper, pasted, folded, and finished 300 in a minute. Here, the whole process, which, when carried on as Manufacture, was split up into, and carried out by, a series of operations, is completed by a single machine, working a combination of various tools. Now, whether such a machine be merely a reproduction of a complicated manual implement, or a combination of various simple implements specialised by Manufacture, in either case, in the factory, i. e. , in the workshop in which machinery alone is used, we meet again with simple co-operation; and, leaving the workman out of consideration for the moment, this co- operation presents itself to us, in the first instance, as the conglomeration in one place of similar and simultaneously acting machines. Thus, a weaving factory is constituted of a number of power-looms, working side by side, and a sewing factory of a number of sewing-machines all in the same building. But there is here a technical oneness in the whole system, owing to all the machines receiving their impulse simultaneously, and in an equal degree, from the pulsations of the common prime mover, by the intermediary of the transmitting mechanism; and this mechanism, to a certain extent, is also common to them all, since only particular ramifications of it branch off to each machine. Just as a number of tools, then, form the organs of a machine, so a number of machines of one kind constitute the organs of the motive mechanism.
A real machinery system, however, does not take the place of these independent machines, until the subject of labour goes through a connected series of detail processes, that are carried out by a chain of machines of various kinds, the one supplementing the other. Here we have again the co- operation by division of labour that characterises Manufacture; only now, it is a combination of detail machines. The special tools of the various detail workmen, such as those of the beaters, cambers, spinners, &c. , in the woollen manufacture, are now transformed into the tools of specialised machines, each machine constituting a special organ, with a special function, in the system. In those branches of industry in which the machinery system is first introduced,
? 261 Chapter 15
Manufacture itself furnishes, in a general way, the natural basis for the division, and consequent organisation, of the process of production. 16 Nevertheless an essential difference at once manifests itself. In Manufacture it is the workmen who, with their manual implements, must, either singly or in groups, carry on each particular detail process. If, on the one hand, the workman becomes adapted to the process, on the other, the process was previously made suitable to the workman. This subjective principle of the division of labour no longer exists in production by machinery. Here, the process as a whole is examined objectively, in itself, that is to say, without regard to the question of its execution by human hands, it is analysed into its constituent phases; and the problem, how to execute each detail process, and bind them all into a whole, is solved by the aid of machines, chemistry, &c. 17 But, of course, in this case also, theory must be perfected by accumulated experience on a large scale. Each detail machine supplies raw material to the machine next in order; and since they are all working at the same time, the product is always going through the various stages of its fabrication, and is also constantly in a state of transition, from one phase to another. Just as in Manufacture, the direct co-operation of the detail labourers establishes a numerical proportion between the special groups, so in an organised system of machinery, where one detail machine is constantly kept employed by another, a fixed relation is established between their numbers, their size, and their speed. The collective machine, now an organised system of various kinds of single machines, and of groups of single machines, becomes more and more perfect, the more the process as a whole becomes a continuous one, i. e. , the less the raw material is interrupted in its passage from its first phase to its last; in other words, the more its passage from one phase to another is effected, not by the hand of man, but by the machinery itself. In Manufacture the isolation of each detail process is a condition imposed by the nature of division of labour, but in the fully developed factory the continuity of those processes is, on the contrary, imperative.
A system of machinery, whether it reposes on the mere co-operation of similar machines, as in weaving, or on a combination of different machines, as in spinning, constitutes in itself a huge automaton, whenever it is driven by a self-acting prime mover. But although the factory as a whole be driven by its steam-engine, yet either some of the individual machines may require the aid of the workman for some of their movements (such aid was necessary for the running in of the mule carriage, before the invention of the self-acting mule, and is still necessary in fine-spinning mills); or, to enable a machine to do its work, certain parts of it may require to be handled by the workman like a manual tool; this was the case in machine-makers' workshops, before the conversion of the slide rest into a self-actor. As soon as a machine executes, without man's help, all the movements requisite to elaborate the raw material, needing only attendance from him, we have an automatic system of machinery, and one that is susceptible of constant improvement in its details. Such improvements as the apparatus that stops a drawing frame, whenever a sliver breaks, and the self-acting stop, that stops the power-loom so soon as the shuttle bobbin is emptied of weft, are quite modern inventions. As an example, both of continuity of production, and of the carrying out of the automatic principle, we may take a modern paper mill. In the paper industry generally, we may advantageously study in detail not only the distinctions between modes of production based on different means of production, but also the connexion of the social conditions of production with those modes: for the old German paper-making furnishes us with a sample of handicraft production; that of Holland in the 17th and of France in the 18th century with a sample of manufacturing in the strict sense; and that of modern England with a sample of automatic fabrication of this article. Besides these, there still exist, in India and China, two distinct antique Asiatic forms of the same industry.
? 262 Chapter 15
An organised system of machines, to which motion is communicated by the transmitting mechanism from a central automaton, is the most developed form of production by machinery. Here we have, in the place of the isolated machine, a mechanical monster whose body fills whole factories, and whose demon power, at first veiled under the slow and measured motions of his giant limbs, at length breaks out into the fast and furious whirl of his countless working organs.
There were mules and steam-engines before there were any labourers, whose exclusive occupation it was to make mules and steam-engines; just as men wore clothes before there were such people as tailors. The inventions of Vaucanson, Arkwright, Watt, and others, were, however, practicable, only because those inventors found, ready to hand, a considerable number of skilled mechanical workmen, placed at their disposal by the manufacturing period. Some of these workmen were independent handicraftsman of various trades, others were grouped together in manufactures, in which, as before-mentioned, division of labour was strictly carried out. As inventions increased in number, and the demand for the newly discovered machines grew larger, the machine-making industry split up, more and more, into numerous independent branches, and division of labour in these manufactures was more and more developed. Here, then, we see in Manufacture the immediate technical foundation of modern industry. Manufacture produced the machinery, by means of which modern industry abolished the handicraft and manufacturing systems in those spheres of production that it first seized upon. The factory system was therefore raised, in the natural course of things, on an inadequate foundation. When the system attained to a certain degree of development, it had to root up this ready-made foundation, which in the meantime had been elaborated on the old lines, and to build up for itself a basis that should correspond to its methods of production. Just as the individual machine retains a dwarfish character, so long as it is worked by the power of man alone, and just as no system of machinery could be properly developed before the steam-engine took the place of the earlier motive powers, animals, wind, and even water; so, too, modern industry was crippled in its complete development, so long as its characteristic instrument of production, the machine, owed its existence to personal strength and personal skill, and depended on the muscular development, the keenness of sight, and the cunning of hand, with which the detail workmen in manufactures, arid the manual labourers in handicrafts, wielded their dwarfish implements. Thus, apart from the dearness of the machines made in this way, a circumstance that is ever present to the mind of the capitalist, the expansion of industries carried on by means of machinery, and the invasion by machinery of fresh branches of production, were dependent on the growth of a class of workmen, who, owing to the almost artistic nature of their employment, could increase their numbers only gradually, and not by leaps and bounds. But besides this, at a certain stage of its development, modern industry became technologically incompatible with the basis furnished for it by handicraft and Manufacture. The increasing size of the prime movers, of the transmitting mechanism, and of the machines proper, the greater complication, multiformity and regularity of the details of these machines, as they more and more departed from the model of those originally made by manual labour, and acquired a form, untrammelled except by the conditions under which they worked,18 the perfecting of the automatic system, and the use, every day more unavoidable, of a more refractory material, such as iron instead of wood-the solution of all these problems, which sprang up by the force of circumstances, everywhere met with a stumbling-block in the personal restrictions, which even the collective labourer of Manufacture could not break through, except to a limited extent. Such machines as the modern hydraulic press, the modern power-loom, and the modern carding engine, could never have been furnished by Manufacture.
A radical change in the mode of production in one sphere of industry involves a similar change in other spheres. This happens at first in such branches of industry as are connected together by
? 263 Chapter 15
being separate phases of a process, and yet are isolated by the social division of labour, in such a way, that each of them produces an independent commodity. Thus spinning by machinery made weaving by machinery a necessity, and both together made the mechanical and chemical revolution that took place in bleaching, printing, and dyeing, imperative. So too, on the other hand, the revolution in cotton-spinning called forth the invention of the gin, for separating the seeds from the cotton fibre; it was only by means of this invention, that the production of cotton became possible on the enormous scale at present required. 19 But more especially, the revolution in the modes of production of industry and agriculture made necessary a revolution in the general conditions of the social process of production, i. e. , in the means of communication and of transport. In a society whose pivot, to use an expression of Fourier, was agriculture on a small scale, with its subsidiary domestic industries, and the urban handicrafts, the means of communication and transport were so utterly inadequate to the productive requirements of the manufacturing period, with its extended division of social labour, its concentration of the instruments of labour, and of the workmen, and its colonial markets, that they became in fact revolutionised. In the same way the means of communication and transport handed down from the manufacturing period soon became unbearable trammels on modern industry, with its feverish haste of production, its enormous extent, its constant flinging of capital and labour from one sphere of production into another, and its newly-created connexions with the markets of the whole world. Hence, apart from the radical changes introduced in the construction of sailing vessels, the means of communication and transport became gradually adapted to the modes of production of mechanical industry, by the creation of a system of river steamers, railways, ocean steamers, and telegraphs. But the huge masses of iron that had now to be forged, to be welded, to be cut, to be bored, and to be shaped, demanded, on their part, cyclopean machines, for the construction of which the methods of the manufacturing period were utterly inadequate.
modern industry had therefore itself to take in hand the machine, its characteristic instrument of production, and to construct machines by machines. It was not till it did this, that it built up for itself a fitting technical foundation, and stood on its own feet. Machinery, simultaneously with the increasing use of it, in the first decades of this century, appropriated, by degrees, the fabrication of machines proper. But it was only during the decade preceding 1866, that the construction of railways and ocean steamers on a stupendous scale called into existence the cyclopean machines now employed in the construction of prime movers.
The most essential condition to the production of machines by machines was a prime mover capable of exerting any amount of force, and yet under perfect control. Such a condition was already supplied by the steam-engine. But at the same time it was necessary to produce the geometrically accurate straight lines, planes, circles, cylinders, cones, and spheres, required in the detail parts of the machines. This problem Henry Maudsley solved in the first decade of this century by the invention of the slide rest, a tool that was soon made automatic, and in a modified form was applied to other constructive machines besides the lathe, for which it was originally intended. This mechanical appliance replaces, not some particular tool, but the hand itself, which produces a given form by holding and guiding the cutting tool along the iron or other material operated upon. Thus it became possible to produce the forms of the individual parts of machinery
--with a degree of ease, accuracy, and speed, that no accumulated experience of the hand of the most skilled workman could give. ? 20
If we now fix our attention on that portion of the machinery employed in the construction of machines, which constitutes the operating tool, we find the manual implements re-appearing, but on a cyclopean scale. The operating part of the boring machine is an immense drill driven by a steam-engine; without this machine, on the other hand, the cylinders of large steam-engines and
? 264 Chapter 15
of hydraulic presses could not be made. The mechanical lathe is only a cyclopean reproduction of the ordinary foot-lathe; the planing machine, an iron carpenter, that works on iron with the same tools that the human carpenter employs on wood; the instrument that, on the London wharves, cuts the veneers, is a gigantic razor; the tool of the shearing machine, which shears iron as easily as a tailor's scissors cut cloth, is a monster pair of scissors; and the steam-hammer works with an ordinary hammer head, but of such a weight that not Thor himself could wield it. 21 These steam- hammers are an invention of Nasmyth, and there is one that weighs over 6 tons and strikes with a vertical fall of 7 feet, on an anvil weighing 36 tons. It is mere child's-play for it to crush a block of granite into powder, yet it is no less capable of driving, with a succession of light taps, a nail into a piece of soft wood. 22
The implements of labour, in the form of machinery, necessitate the substitution of natural forces for human force, and the conscious application of science, instead of rule of thumb. In Manufacture, the organisation of the social labour-process is purely subjective; it is a combination of detail labourers; in its machinery system, modern industry has a productive organism that is purely objective, in which the labourer becomes a mere appendage to an already existing material condition of production. In simple co-operation, and even in that founded on division of labour, the suppression of the isolated, by the collective, workman still appears to be more or less accidental. Machinery, with a few exceptions to be mentioned later, operates only by means of associated labour, or labour in common. Hence the co-operative character of the labour-process is, in the latter case, a technical necessity dictated by the instrument of labour itself.
Section 2: The Value Transferred by Machinery to the Product
We saw that the productive forces resulting from co-operation and division of labour cost capital nothing. They are natural forces of social labour. So also physical forces, like steam, water, &c. , when appropriated to productive processes, cost nothing. But just as a man requires lungs to breathe with, so he requires something that is work of man's hand, in order to consume physical forces productively. A water-wheel is necessary to exploit the force of water, and a steam-engine to exploit the elasticity of steam. Once discovered, the law of the deviation of the magnetic needle in the field of an electric current, or the law of the magnetisation of iron, around which an electric current circulates, cost never a penny. 23 But the exploitation of these laws for the purposes of telegraphy, &c. , necessitates a costly and extensive apparatus. The tool, as we have seen, is not exterminated by the machine. From being a dwarf implement of the human organism, it expands and multiplies into the implement of a mechanism created by man. Capital now sets the labourer to work, not with a manual tool, but with a machine which itself handles the tools. Although, therefore, it is clear at the first glance that, by incorporating both stupendous physical forces, and the natural sciences, with the process of production, modern industry raises the productiveness of labour to an extraordinary degree, it is by no means equally clear, that this increased productive force is not, on the other hand, purchased by an increased expenditure of labour. Machinery, like every other component of constant capital, creates no new value, but yields up its own value to the product that it serves to beget. In so far as the machine has value, and, in consequence, parts with value to the product, it forms an element in the value of that product. Instead of being cheapened, the product is made dearer in proportion to the value of the machine. And it is clear as noon-day, that machines and systems of machinery, the characteristic instruments of labour of Modern Industry, are incomparably more loaded with value than the implements used in handicrafts and manufactures.
In the first place, it must be observed that the machinery, while always entering as a whole into the labour-process, enters into the value-begetting process only by bits. It never adds more value
? 265 Chapter 15
than it loses, on an average, by wear and tear. Hence there is a great difference between the value of a machine, and the value transferred in a given time by that machine to the product. The longer the life of the machine in the labour-process, the greater is that difference. It is true, no doubt, as we have already seen, that every instrument of labour enters as a whole into the labour-process, and only piece-meal, proportionally to its average daily loss by wear and tear, into the value- begetting process. But this difference between the instrument as a whole and its daily wear and tear, is much greater in a machine than in a tool, because the machine, being made from more durable material, has a longer life; because its employment, being regulated by strictly scientific laws, allows of greater economy in the wear and tear of its parts, and in the materials it consumes; and lastly, because its field of production is incomparably larger than that of a tool. After making allowance, both in the case of the machine and of the tool, for their average daily cost, that is for the value they transmit to the product by their average daily wear and tear, and for their consumption of auxiliary substance, such as oil, coal, and so on, they each do their work gratuitously, just like the forces furnished by Nature without the help of man. The greater the productive power of the machinery compared with that of the tool, the greater is the extent of its gratuitous service compared with that of the tool. In modern industry man succeeded for the first time in making the product of his past labour work on a large scale gratuitously, like the forces of Nature. 24
In treating of Co-operation and Manufacture, it was shown that certain general factors of production, such as buildings, are, in comparison with the scattered means of production of the isolated workman, economised by being consumed in common, and that they therefore make the product cheaper. In a system of machinery, not only is the framework of the machine consumed in common by its numerous operating implements, but the prime mover, together with a part of the transmitting mechanism, is consumed in common by the numerous operative machines.
Given the difference between the value of the machinery, and the value transferred by it in a day to the product, the extent to which this latter value makes the product dearer, depends in the first instance, upon the size of the product; so to say, upon its area. Mr. Baynes, of Blackburn, in a lecture published in 1858, estimates that
--each real mechanical horse-power25 will drive 450 self-acting mule spindles, with preparation, or 200 throstle spindles, or 15 looms for 40 inch cloth with the appliances for warping, sizing, &c. ?
In the first case, it is the day's produce of 450 mule spindles, in the second, of 200 throstle spindles, in the third, of 15 power-looms, over which the daily cost of one horse-power, and the wear and tear of the machinery set in motion by that power, are spread; so that only a very minute value is transferred by such wear and tear to a pound of yarn or a yard of cloth. The same is the case with the steam-hammer mentioned above. Since its daily wear and tear, its coal- consumption, &c. , are spread over the stupendous masses of iron hammered by it in a day, only a small value is added to a hundred weight of iron; but that value would be very great, if the cyclopean instrument were employed in driving in nails.
Given a machine's capacity for work, that is, the number of its operating tools, or, where it is a question of force, their mass, the amount of its product will depend on the velocity of its working parts, on the speed, for instance, of the spindles, or on the number of blows given by the hammer in a minute. Many of these colossal hammers strike seventy times in a minute, and Ryder's patent machine for forging spindles with small hammers gives as many as 700 strokes per minute.
Given the rate at which machinery transfers its value to the product, the amount of value so transferred depends on the total value of the machinery. 26 The less labour it contains, the less value it imparts to the product. The less value it gives up, so much the more productive it is, and
? 266 Chapter 15
so much the more its services approximate to those of natural forces. But the production of machinery by machinery lessens its value relatively to its extension and efficacy.
An analysis and comparison of the prices of commodities produced by handicrafts or manufactures, and of the prices of the same commodities produced by machinery, shows generally, that, in the product of machinery, the value due to the instruments of labour increases relatively, but decreases absolutely. In other words, its absolute amount decreases, but its amount, relatively to the total value of the product, of a pound of yarn, for instance, increases. 27
It is evident that whenever it costs as much labour to produce a machine as is saved by the employment of that machine, there is nothing but a transposition of labour; consequently the total labour required to produce a commodity is not lessened or the productiveness of labour is not increased. It is clear, however, that the difference between the labour a machine costs, and the labour it saves, in other words, that the degree of its productiveness does not depend on the difference between its own value and the value of the implement it replaces. As long as the labour spent on a machine, and consequently the portion of its value added to the product, remains smaller than the value added by the workman to the product with his tool, there is always a difference of labour saved in favour of the machine. The productiveness of a machine is therefore measured by the human labour-power it replaces. According to Mr. Baynes, 2 operatives are required for the 450 mule spindles, inclusive of preparation machinery,28 that are driven by one- horse power; each self-acting mule spindle, working ten hours, produces 13 ounces of yarn (average number of thickness); consequently 21/2 operatives spin weekly 365 5/8 lbs. of yarn. Hence, leaving waste on one side, 366 lbs. of cotton absorb, during their conversion into yarn, only 150 hours' labour, or fifteen days' labour of ten hours each. But with a spinning-wheel, supposing the hand-spinner to produce thirteen ounces of yarn in sixty hours, the same weight of cotton would absorb 2,700 days' labour of ten hours each, or 27,000 hours' labour. 29 Where blockprinting, the old method of printing calico by hand, has been superseded by machine printing, a single machine prints, with the aid of one man or boy, as much calico of four colours in one hour, as it formerly took 200 men to do. 30 Before Eli Whitney invented the cotton gin in 1793, the separation of the seed from a pound of cotton cost an average day's labour. By means of his invention one negress was enabled to clean 100 lbs. daily; and since then, the efficacy of the gin has been considerably increased. A pound of cotton wool, previously costing 50 cents to produce, included after that invention more unpaid labour, and was consequently sold with greater profit, at 10 cents. In India they employ for separating the wool from the seed, an instrument, half machine, half tool, called a churka; with this one man and a woman can clean 28 lbs. daily. With the churka invented some years ago by Dr. Forbes, one man and a boy produce 250 lbs. daily. If oxen, steam, or water, be used for driving it, only a few boys and girls as feeders are required. Sixteen of these machines driven by oxen do as much work in a day as formerly 750 people did on an average. 31
As already stated, a steam-plough does as much work in one hour at a cost of three-pence, as 66 men at a cost of 15 shillings. I return to this example in order to clear up an erroneous notion. The 15 shillings are by no means the expression in money of all the labour expended in one hour by the 66 men. If the ratio of surplus labour to necessary labour were 100%, these 66 men would produce in one hour a value of 30 shillings, although their wages, 15 shillings, represent only their labour for half an hour. Suppose, then, a machine cost as much as the wages for a year of the 150 men it displaces, say ? 3,000; this ? 3,000 is by no means the expression in money of the labour added to the object produced by these 150 men before the introduction of the machine, but only of that portion of their year's labour which was expended for themselves and represented by their wages. On the other hand, the ? 3,000, the money-value of the machine, expresses all the
? 267 Chapter 15
labour expended on its production, no matter in what proportion this labour constitutes wages for the workman, and surplus value for the capitalist. Therefore, though a machine cost as much as the labour-power displaced by it costs, yet the labour materialised in it is even then much less than the living labour it replaces. 32
The use of machinery for the exclusive purpose of cheapening the product, is limited in this way, that less labour must be expended in producing the machinery than is displaced by the employment of that machinery, For the capitalist, however, this use is still more limited. Instead of paying for the labour, he only pays the value of the labour-power employed; therefore, the limit to his using a machine is fixed by the difference between the value of the machine and the value of the labour-power replaced by it. Since the division of the day's work into necessary and surplus labour differs in different countries, and even in the same country at different periods, or in different branches of industry; and further, since the actual wage of the labourer at one time sinks below the value of his labour-power, at another rises above it, it is possible for the difference between the price of the machinery and the price of the labour-power replaced by that machinery to vary very much, although the difference between the quantity of labour requisite to produce the machine and the total quantity replaced by it, remain constant. 33 But it is the former difference alone that determines the cost, to the capitalist, of producing a commodity, and, through the pressure of competition, influences his action. Hence the invention now-a-days of machines in England that are employed only in North America; just as in the sixteenth and seventeenth centuries, machines were invented in Germany to be used only in Holland, and just as many a French invention of the eighteenth century was exploited in England alone. In the older countries, machinery, when employed in some branches of industry, creates such a redundancy of labour in other branches that in these latter the fall of wages below the value of labour-power impedes the use of machinery, and, from the standpoint of the capitalist, whose profit comes, not from a diminution of the labour employed, but of the labour paid for, renders that use superfluous and often impossible. In some branches of the woollen manufacture in England the employment of children has during recent years been considerably diminished, and in some cases has been entirely abolished. Why? Because the Factory Acts made two sets of children necessary, one working six hours, the other four, or each working five hours. But the parents refused to sell the --half-timers? cheaper than the --full-timers. ? Hence the substitution of machinery for the --half- timers. ? 34 Before the labour of women and of children under 10 years of age was forbidden in mines, capitalists considered the employment of naked women and girls, often in company with men, so far sanctioned by their moral code, and especially by their ledgers, that it was only after the passing of the Act that they had recourse to machinery. The Yankees have invented a stone- breaking machine. The English do not make use of it, because the --wretch? 35who does this work gets paid for such a small portion of his labour, that machinery would increase the cost of production to the capitalist. 36 In England women are still occasionally used instead of horses for hauling canal boats37, because the labour required to produce horses and machines is an accurately known quantity, while that required to maintain the women of the surplus-population is below all calculation. Hence nowhere do we find a more shameful squandering of human labour-power for the most despicable purposes than in England, the land of machinery.
Section 3: The Proximate Effects of Machinery on the Workman
The starting-point of modern industry is, as we have shown, the revolution in the instruments of labour, and this revolution attains its most highly developed form in the organised system of
?
58 Xenophon says, it is not only an honour to receive food from the table of the King of Persia, but such food is much more tasty than other food. --And there is nothing wonderful in this, for as the other arts are brought to special perfection in the great towns, so the royal food is prepared in a special way. For in the small towns the same man makes bedsteads, doors, ploughs, and tables: often, too, he builds houses into the bargain, and is quite content if he finds custom sufficient for his sustenance. It is altogether impossible for a man who does so many things to do them all well. But in the great towns, where each can find many buyers, one trade is sufficient to maintain the man who carries it on. Nay, there is often not even need of one complete trade, but one man makes shoes for men, another for women. Here and there one man gets a living by sewing, another by cutting out shoes; one does nothing but cut out clothes, another nothing but sew the pieces together. It follows necessarily then, that he who does the simplest kind of work, undoubtedly does it better than anyone else. So it is with the art of cooking. ? (Xen. Cyrop. I. viii. , c. 2. ) Xenophon here lays stress exclusively upon the excellence to be attained in use-value, although he well knows that the gradations of the division of labour depend on the extent of the market.
59 He (Busiris) divided them all into special castes . . . commanded that the same individuals should always carry on the same trade, for he knew that they who change their occupations become skilled in none; but that those who constantly stick to one occupation bring it to the highest perfection. In truth, we shall also find that in relation to the arts and handicrafts, they have outstripped their rivals more than a master does a bungler; and the contrivances for maintaining the monarchy and the other institutions of their State are so admirable that the most celebrated philosophers who treat of this subject praise the constitution of the Egyptian State above all others. (Isocrates, Busiris, c. 8. )
? ? 256 Chapter 14
60 Cf. Diodorus Siculus.
61 Ure, l. c. , p. 20.
62 This is more the case in England than in France, and more in France than in Holland.
? ? Chapter 15: Machinery and Modern Industry
Section 1 : The Development of Machinery
John Stuart Mill says in his --Principles of Political Economy":
--It is questionable if all the mechanical inventions yet made have lightened the day's toil of any human being. ? 1
That is, however, by no means the aim of the capitalistic application of machinery. Like every other increase in the productiveness of labour, machinery is intended to cheapen commodities, and, by shortening that portion of the working day, in which the labourer works for himself, to lengthen the other portion that he gives, without an equivalent, to the capitalist. In short, it is a means for producing surplus value.
In manufacture, the revolution in the mode of production begins with the labour-power, in modern industry it begins with the instruments of labour. Our first inquiry then is, how the instruments of labour are converted from tools into machines, or what is the difference between a machine and the implements of a handicraft? We are only concerned here with striking and general characteristics; for epochs in the history of society are no more separated from each other by hard and fast lines of demarcation, than are geological epochs.
Mathematicians and mechanicians, and in this they are followed by a few English economists, call a tool a simple machine, and a machine a complex tool. They see no essential difference between them, and even give the name of machine to the simple mechanical powers, the lever, the inclined plane, the screw, the wedge, &c. 2 As a matter of fact, every machine is a combination of those simple powers, no matter how they may be disguised. From the economic standpoint this explanation is worth nothing, because the historical element is wanting. Another explanation of the difference between tool and machine is that in the case of a tool, man is the motive power, while the motive power of a machine is something different from man, as, for instance, an animal, water, wind, and so on. 3 According to this, a plough drawn by oxen, which is a contrivance common to the most different epochs, would be a machine, while Claussen's circular loom, which, worked by a single labourer, weaves 96,000 picks per minute, would be a mere tool. Nay, this very loom, though a tool when worked by hand, would, if worked by steam, be a machine. And since the application of animal power is one of man's earliest inventions, production by machinery would have preceded production by handicrafts. When in 1735, John Wyatt brought out his spinning machine, and began the industrial revolution of the 18th century, not a word did he say about an ass driving it instead of a man, and yet this part fell to the ass. He described it as a machine --to spin without fingers. ? 4
All fully developed machinery consists of three essentially different parts, the motor mechanism, the transmitting mechanism, and finally the tool or working machine. The motor mechanism is that which puts the whole in motion. It either generates its own motive power, like the steam- engine, the caloric engine, the electromagnetic machine, &c. , or it receives its impulse from some already existing natural force, like the water-wheel from a head of water, the wind-mill from wind, &c. The transmitting mechanism, composed of fly-wheels, shafting, toothed wheels, pullies, straps, ropes, bands, pinions, and gearing of the most varied kinds, regulates the motion, changes its form. where necessary, as for instance, from linear to circular, and divides and distributes it among the working machines. These two first parts of the whole mechanism are
? 258 Chapter 15
there, solely for putting the working machines in motion, by means of which motion the subject of labour is seized upon and modified as desired. The tool or working machine is that part of the machinery with which the industrial revolution of the 18th century started. And to this day it constantly serves as such a starting-point, whenever a handicraft, or a manufacture, is turned into an industry carried on by machinery.
On a closer examination of the working machine proper, we find in it, as a general rule, though often, no doubt, under very altered forms, the apparatus and tools used by the handicraftsman or manufacturing workman; with this difference, that instead of being human implements, they are the implements of a mechanism, or mechanical implements. Either the entire machine is only a more or less altered mechanical edition of the old handicraft tool, as, for instance, the power- loom,5 or the working parts fitted in the frame of the machine are old acquaintances, as spindles are in a mule, needles in a stocking-loom, saws in a sawing-machine, and knives in a chopping machine. The distinction between these tools and the body proper of the machine, exists from their very birth; for they continue for the most part to be produced by handicraft, or by manufacture, and are afterwards fitted into the body of the machine, which is the product of machinery. 6 The machine proper is therefore a mechanism that, after being set in motion, performs with its tools the same operations that were formerly done by the workman with similar tools. Whether the motive power is derived from man, or from some other machine, makes no difference in this respect. From the moment that the tool proper is taken from man, and fitted into a mechanism, a machine takes the place of a mere implement. The difference strikes one at once, even in those cases where man himself continues to be the prime mover. The number of implements that he himself can use simultaneously, is limited by the number of his own natural instruments of production, by the number of his bodily organs. In Germany, they tried at first to make one spinner work two spinning-wheels, that is, to work simultaneously with both hands and both feet. This was too difficult. Later, a treddle spinning-wheel with two spindles was invented, but adepts in spinning, who could spin two threads at once, were almost as scarce as two-headed men. The Jenny, on the other hand, even at its very birth, spun with 12-18 spindles, and the stocking-loom knits with many thousand needles at once. The number of tools that a machine can bring into play simultaneously, is from the very first emancipated from the organic limits that hedge in the tools of a handicraftsman.
In many manual implements the distinction between man as mere motive power, and man as the workman or operator properly so called, is brought into striking contrast. For instance, the foot is merely the prime mover of the spinning-wheel, while the hand, working with the spindle, and drawing and twisting, performs the real operation of spinning. It is this last part of the handicraftsman's implement that is first seized upon by the industrial revolution, leaving to the workman, in addition to his new labour of watching the machine with his eyes and correcting its mistakes with his hands, the merely mechanical part of being the moving power. On the other hand, implements, in regard to which man has always acted as a simple motive power, as, for instance, by turning the crank of a mill,7 by pumping, by moving up and down the arm of a bellows, by pounding with a mortar, &c. , such implements soon call for the application of animals, water8 and wind as motive powers. Here and there, long before the period of manufacture, and also, to some extent, during that period, these implements pass over into machines, but without creating any revolution in the mode of production. It becomes evident, in the period of modern industry, that these implements, even under their form of manual tools, are already machines. For instance, the pumps with which the Dutch, in 1836-7, emptied the Lake of Harlem, were constructed on the principle of ordinary pumps; the only difference being, that their pistons were driven by cyclopean steam-engines, instead of by men. The common and very
? 259 Chapter 15
imperfect bellows of the blacksmith is, in England, occasionally converted into a blowing-engine, by connecting its arm with a steam-engine. The steam-engine itself, such as it was at its invention, during the manufacturing period at the close of the 17th century, and such as it continued to be down to 1780,9 did not give rise to any industrial revolution. It was, on the contrary, the invention of machines that made a revolution in the form of steam-engines necessary. As soon as man, instead of working with an implement on the subject of his labour, becomes merely the motive power of an implement-machine, it is a mere accident that motive power takes the disguise of human muscle; and it may equally well take the form of wind, water or steam. Of course, this does not prevent such a change of form from producing great technical alterations in the mechanism that was originally constructed to be driven by man alone. Now-a- days, all machines that have their way to make, such as sewing-machines, bread-making machines, &c. , are, unless from their very nature their use on a small scale is excluded, constructed to be driven both by human and by purely mechanical motive power.
The machine, which is the starting-point of the industrial revolution, supersedes the workman, who handles a single tool, by a mechanism operating with a number of similar tools, and set in motion by a single motive power, whatever the form of that power may be. 10 Here we have the machine, but only as an elementary factor of production by machinery.
Increase in the size of the machine, and in the number of its working tools, calls for a more massive mechanism to drive it; and this mechanism requires, in order to overcome its resistance, a mightier moving power than that of man, apart from the fact that man is a very imperfect instrument for producing uniform continued motion. But assuming that he is acting simply as a motor, that a machine has taken the place of his tool, it is evident that he can be replaced by natural forces. Of all the great motors handed down from the manufacturing period, horse-power is the worst, partly because a horse has a head of his own, partly because he is costly, and the extent to which he is applicable in factories is very restricted. 11 Nevertheless the horse was extensively used during the infancy of modern industry. This is proved, as well by the complaints of contemporary agriculturists, as by the term --horse-power,? which has survived to this day as an expression for mechanical force.
Wind was too inconstant and uncontrollable, and besides, in England, the birthplace of modern industry, the use of water power preponderated even during the manufacturing period. In the 17th century attempts had already been made to turn two pairs of millstones with a single water-wheel. But the increased size of the gearing was too much for the water power, which had now become insufficient, and this was one of the circumstances that led to a more accurate investigation of the laws of friction. In the same way the irregularity caused by the motive power in mills that were put in motion by pushing and pulling a lever, led to the theory, and the application, of the fly- wheel, which afterwards plays so important a part in modern industry. 12 In this way, during the manufacturing period, were developed the first scientific and technical elements of Modern Mechanical Industry. Arkwright's throstle spinning mill was from the very first turned by water.
But for all that, the use of water, as the predominant motive power, was beset with difficulties. It could not be increased at will, it failed at certain seasons of the year, and, above all, it was essentially local. 13 Not till the invention of Watt's second and so-called double-acting steam- engine, was a prime mover found, that begot its own force by the consumption of coal and water, whose power was entirely under man's control, that was mobile and a means of locomotion, that was urban and not, like the waterwheel, rural, that permitted production to be concentrated in towns instead of, like the water-wheels, being scattered up and down the country,14 that was of universal technical application, and, relatively speaking, little affected in its choice of residence by local circumstances. The greatness of Watt's genius showed itself in the specification of the
? 260 Chapter 15
patent that he took out in April, 1784. In that specification his steam-engine is described, not as an invention for a specific purpose, but as an agent universally applicable in Mechanical Industry. In it he points out applications, many of which, as for instance, the steam-hammer, were not introduced till half a century later. Nevertheless he doubted the use of steam-engines in navigation. His successors, Boulton and Watt, sent to the exhibition of 1851 steam-engines of colossal size for ocean steamers.
As soon as tools had been converted from being manual implements of man into implements of a mechanical apparatus, of a machine, the motive mechanism also acquired an independent form, entirely emancipated from the restraints of human strength. Thereupon the individual machine, that we have hitherto been considering, sinks into a mere factor in production by machinery. One motive mechanism was now able to drive many machines at once. The motive mechanism grows with the number of the machines that are turned simultaneously, and the transmitting mechanism becomes a wide-spreading apparatus.
We now proceed to distinguish the co-operation of a number of machines of one kind from a complex system of machinery.
In the one case, the product is entirely made by a single machine, which performs all the various operations previously done by one handicraftsman with his tool; as, for instance, by a weaver with his loom; or by several handicraftsman successively, either separately or as members of a system of Manufacture. 15 For example, in the manufacture of envelopes, one man folded the paper with the folder, another laid on the gum, a third turned the flap over, on which the device is impressed, a fourth embossed the device, and so on; and for each of these operations the envelope had to change hands. One single envelope machine now performs all these operations at once, and makes more than 3,000 envelopes in an hour. In the London exhibition of 1862, there was an American machine for making paper cornets. It cut the paper, pasted, folded, and finished 300 in a minute. Here, the whole process, which, when carried on as Manufacture, was split up into, and carried out by, a series of operations, is completed by a single machine, working a combination of various tools. Now, whether such a machine be merely a reproduction of a complicated manual implement, or a combination of various simple implements specialised by Manufacture, in either case, in the factory, i. e. , in the workshop in which machinery alone is used, we meet again with simple co-operation; and, leaving the workman out of consideration for the moment, this co- operation presents itself to us, in the first instance, as the conglomeration in one place of similar and simultaneously acting machines. Thus, a weaving factory is constituted of a number of power-looms, working side by side, and a sewing factory of a number of sewing-machines all in the same building. But there is here a technical oneness in the whole system, owing to all the machines receiving their impulse simultaneously, and in an equal degree, from the pulsations of the common prime mover, by the intermediary of the transmitting mechanism; and this mechanism, to a certain extent, is also common to them all, since only particular ramifications of it branch off to each machine. Just as a number of tools, then, form the organs of a machine, so a number of machines of one kind constitute the organs of the motive mechanism.
A real machinery system, however, does not take the place of these independent machines, until the subject of labour goes through a connected series of detail processes, that are carried out by a chain of machines of various kinds, the one supplementing the other. Here we have again the co- operation by division of labour that characterises Manufacture; only now, it is a combination of detail machines. The special tools of the various detail workmen, such as those of the beaters, cambers, spinners, &c. , in the woollen manufacture, are now transformed into the tools of specialised machines, each machine constituting a special organ, with a special function, in the system. In those branches of industry in which the machinery system is first introduced,
? 261 Chapter 15
Manufacture itself furnishes, in a general way, the natural basis for the division, and consequent organisation, of the process of production. 16 Nevertheless an essential difference at once manifests itself. In Manufacture it is the workmen who, with their manual implements, must, either singly or in groups, carry on each particular detail process. If, on the one hand, the workman becomes adapted to the process, on the other, the process was previously made suitable to the workman. This subjective principle of the division of labour no longer exists in production by machinery. Here, the process as a whole is examined objectively, in itself, that is to say, without regard to the question of its execution by human hands, it is analysed into its constituent phases; and the problem, how to execute each detail process, and bind them all into a whole, is solved by the aid of machines, chemistry, &c. 17 But, of course, in this case also, theory must be perfected by accumulated experience on a large scale. Each detail machine supplies raw material to the machine next in order; and since they are all working at the same time, the product is always going through the various stages of its fabrication, and is also constantly in a state of transition, from one phase to another. Just as in Manufacture, the direct co-operation of the detail labourers establishes a numerical proportion between the special groups, so in an organised system of machinery, where one detail machine is constantly kept employed by another, a fixed relation is established between their numbers, their size, and their speed. The collective machine, now an organised system of various kinds of single machines, and of groups of single machines, becomes more and more perfect, the more the process as a whole becomes a continuous one, i. e. , the less the raw material is interrupted in its passage from its first phase to its last; in other words, the more its passage from one phase to another is effected, not by the hand of man, but by the machinery itself. In Manufacture the isolation of each detail process is a condition imposed by the nature of division of labour, but in the fully developed factory the continuity of those processes is, on the contrary, imperative.
A system of machinery, whether it reposes on the mere co-operation of similar machines, as in weaving, or on a combination of different machines, as in spinning, constitutes in itself a huge automaton, whenever it is driven by a self-acting prime mover. But although the factory as a whole be driven by its steam-engine, yet either some of the individual machines may require the aid of the workman for some of their movements (such aid was necessary for the running in of the mule carriage, before the invention of the self-acting mule, and is still necessary in fine-spinning mills); or, to enable a machine to do its work, certain parts of it may require to be handled by the workman like a manual tool; this was the case in machine-makers' workshops, before the conversion of the slide rest into a self-actor. As soon as a machine executes, without man's help, all the movements requisite to elaborate the raw material, needing only attendance from him, we have an automatic system of machinery, and one that is susceptible of constant improvement in its details. Such improvements as the apparatus that stops a drawing frame, whenever a sliver breaks, and the self-acting stop, that stops the power-loom so soon as the shuttle bobbin is emptied of weft, are quite modern inventions. As an example, both of continuity of production, and of the carrying out of the automatic principle, we may take a modern paper mill. In the paper industry generally, we may advantageously study in detail not only the distinctions between modes of production based on different means of production, but also the connexion of the social conditions of production with those modes: for the old German paper-making furnishes us with a sample of handicraft production; that of Holland in the 17th and of France in the 18th century with a sample of manufacturing in the strict sense; and that of modern England with a sample of automatic fabrication of this article. Besides these, there still exist, in India and China, two distinct antique Asiatic forms of the same industry.
? 262 Chapter 15
An organised system of machines, to which motion is communicated by the transmitting mechanism from a central automaton, is the most developed form of production by machinery. Here we have, in the place of the isolated machine, a mechanical monster whose body fills whole factories, and whose demon power, at first veiled under the slow and measured motions of his giant limbs, at length breaks out into the fast and furious whirl of his countless working organs.
There were mules and steam-engines before there were any labourers, whose exclusive occupation it was to make mules and steam-engines; just as men wore clothes before there were such people as tailors. The inventions of Vaucanson, Arkwright, Watt, and others, were, however, practicable, only because those inventors found, ready to hand, a considerable number of skilled mechanical workmen, placed at their disposal by the manufacturing period. Some of these workmen were independent handicraftsman of various trades, others were grouped together in manufactures, in which, as before-mentioned, division of labour was strictly carried out. As inventions increased in number, and the demand for the newly discovered machines grew larger, the machine-making industry split up, more and more, into numerous independent branches, and division of labour in these manufactures was more and more developed. Here, then, we see in Manufacture the immediate technical foundation of modern industry. Manufacture produced the machinery, by means of which modern industry abolished the handicraft and manufacturing systems in those spheres of production that it first seized upon. The factory system was therefore raised, in the natural course of things, on an inadequate foundation. When the system attained to a certain degree of development, it had to root up this ready-made foundation, which in the meantime had been elaborated on the old lines, and to build up for itself a basis that should correspond to its methods of production. Just as the individual machine retains a dwarfish character, so long as it is worked by the power of man alone, and just as no system of machinery could be properly developed before the steam-engine took the place of the earlier motive powers, animals, wind, and even water; so, too, modern industry was crippled in its complete development, so long as its characteristic instrument of production, the machine, owed its existence to personal strength and personal skill, and depended on the muscular development, the keenness of sight, and the cunning of hand, with which the detail workmen in manufactures, arid the manual labourers in handicrafts, wielded their dwarfish implements. Thus, apart from the dearness of the machines made in this way, a circumstance that is ever present to the mind of the capitalist, the expansion of industries carried on by means of machinery, and the invasion by machinery of fresh branches of production, were dependent on the growth of a class of workmen, who, owing to the almost artistic nature of their employment, could increase their numbers only gradually, and not by leaps and bounds. But besides this, at a certain stage of its development, modern industry became technologically incompatible with the basis furnished for it by handicraft and Manufacture. The increasing size of the prime movers, of the transmitting mechanism, and of the machines proper, the greater complication, multiformity and regularity of the details of these machines, as they more and more departed from the model of those originally made by manual labour, and acquired a form, untrammelled except by the conditions under which they worked,18 the perfecting of the automatic system, and the use, every day more unavoidable, of a more refractory material, such as iron instead of wood-the solution of all these problems, which sprang up by the force of circumstances, everywhere met with a stumbling-block in the personal restrictions, which even the collective labourer of Manufacture could not break through, except to a limited extent. Such machines as the modern hydraulic press, the modern power-loom, and the modern carding engine, could never have been furnished by Manufacture.
A radical change in the mode of production in one sphere of industry involves a similar change in other spheres. This happens at first in such branches of industry as are connected together by
? 263 Chapter 15
being separate phases of a process, and yet are isolated by the social division of labour, in such a way, that each of them produces an independent commodity. Thus spinning by machinery made weaving by machinery a necessity, and both together made the mechanical and chemical revolution that took place in bleaching, printing, and dyeing, imperative. So too, on the other hand, the revolution in cotton-spinning called forth the invention of the gin, for separating the seeds from the cotton fibre; it was only by means of this invention, that the production of cotton became possible on the enormous scale at present required. 19 But more especially, the revolution in the modes of production of industry and agriculture made necessary a revolution in the general conditions of the social process of production, i. e. , in the means of communication and of transport. In a society whose pivot, to use an expression of Fourier, was agriculture on a small scale, with its subsidiary domestic industries, and the urban handicrafts, the means of communication and transport were so utterly inadequate to the productive requirements of the manufacturing period, with its extended division of social labour, its concentration of the instruments of labour, and of the workmen, and its colonial markets, that they became in fact revolutionised. In the same way the means of communication and transport handed down from the manufacturing period soon became unbearable trammels on modern industry, with its feverish haste of production, its enormous extent, its constant flinging of capital and labour from one sphere of production into another, and its newly-created connexions with the markets of the whole world. Hence, apart from the radical changes introduced in the construction of sailing vessels, the means of communication and transport became gradually adapted to the modes of production of mechanical industry, by the creation of a system of river steamers, railways, ocean steamers, and telegraphs. But the huge masses of iron that had now to be forged, to be welded, to be cut, to be bored, and to be shaped, demanded, on their part, cyclopean machines, for the construction of which the methods of the manufacturing period were utterly inadequate.
modern industry had therefore itself to take in hand the machine, its characteristic instrument of production, and to construct machines by machines. It was not till it did this, that it built up for itself a fitting technical foundation, and stood on its own feet. Machinery, simultaneously with the increasing use of it, in the first decades of this century, appropriated, by degrees, the fabrication of machines proper. But it was only during the decade preceding 1866, that the construction of railways and ocean steamers on a stupendous scale called into existence the cyclopean machines now employed in the construction of prime movers.
The most essential condition to the production of machines by machines was a prime mover capable of exerting any amount of force, and yet under perfect control. Such a condition was already supplied by the steam-engine. But at the same time it was necessary to produce the geometrically accurate straight lines, planes, circles, cylinders, cones, and spheres, required in the detail parts of the machines. This problem Henry Maudsley solved in the first decade of this century by the invention of the slide rest, a tool that was soon made automatic, and in a modified form was applied to other constructive machines besides the lathe, for which it was originally intended. This mechanical appliance replaces, not some particular tool, but the hand itself, which produces a given form by holding and guiding the cutting tool along the iron or other material operated upon. Thus it became possible to produce the forms of the individual parts of machinery
--with a degree of ease, accuracy, and speed, that no accumulated experience of the hand of the most skilled workman could give. ? 20
If we now fix our attention on that portion of the machinery employed in the construction of machines, which constitutes the operating tool, we find the manual implements re-appearing, but on a cyclopean scale. The operating part of the boring machine is an immense drill driven by a steam-engine; without this machine, on the other hand, the cylinders of large steam-engines and
? 264 Chapter 15
of hydraulic presses could not be made. The mechanical lathe is only a cyclopean reproduction of the ordinary foot-lathe; the planing machine, an iron carpenter, that works on iron with the same tools that the human carpenter employs on wood; the instrument that, on the London wharves, cuts the veneers, is a gigantic razor; the tool of the shearing machine, which shears iron as easily as a tailor's scissors cut cloth, is a monster pair of scissors; and the steam-hammer works with an ordinary hammer head, but of such a weight that not Thor himself could wield it. 21 These steam- hammers are an invention of Nasmyth, and there is one that weighs over 6 tons and strikes with a vertical fall of 7 feet, on an anvil weighing 36 tons. It is mere child's-play for it to crush a block of granite into powder, yet it is no less capable of driving, with a succession of light taps, a nail into a piece of soft wood. 22
The implements of labour, in the form of machinery, necessitate the substitution of natural forces for human force, and the conscious application of science, instead of rule of thumb. In Manufacture, the organisation of the social labour-process is purely subjective; it is a combination of detail labourers; in its machinery system, modern industry has a productive organism that is purely objective, in which the labourer becomes a mere appendage to an already existing material condition of production. In simple co-operation, and even in that founded on division of labour, the suppression of the isolated, by the collective, workman still appears to be more or less accidental. Machinery, with a few exceptions to be mentioned later, operates only by means of associated labour, or labour in common. Hence the co-operative character of the labour-process is, in the latter case, a technical necessity dictated by the instrument of labour itself.
Section 2: The Value Transferred by Machinery to the Product
We saw that the productive forces resulting from co-operation and division of labour cost capital nothing. They are natural forces of social labour. So also physical forces, like steam, water, &c. , when appropriated to productive processes, cost nothing. But just as a man requires lungs to breathe with, so he requires something that is work of man's hand, in order to consume physical forces productively. A water-wheel is necessary to exploit the force of water, and a steam-engine to exploit the elasticity of steam. Once discovered, the law of the deviation of the magnetic needle in the field of an electric current, or the law of the magnetisation of iron, around which an electric current circulates, cost never a penny. 23 But the exploitation of these laws for the purposes of telegraphy, &c. , necessitates a costly and extensive apparatus. The tool, as we have seen, is not exterminated by the machine. From being a dwarf implement of the human organism, it expands and multiplies into the implement of a mechanism created by man. Capital now sets the labourer to work, not with a manual tool, but with a machine which itself handles the tools. Although, therefore, it is clear at the first glance that, by incorporating both stupendous physical forces, and the natural sciences, with the process of production, modern industry raises the productiveness of labour to an extraordinary degree, it is by no means equally clear, that this increased productive force is not, on the other hand, purchased by an increased expenditure of labour. Machinery, like every other component of constant capital, creates no new value, but yields up its own value to the product that it serves to beget. In so far as the machine has value, and, in consequence, parts with value to the product, it forms an element in the value of that product. Instead of being cheapened, the product is made dearer in proportion to the value of the machine. And it is clear as noon-day, that machines and systems of machinery, the characteristic instruments of labour of Modern Industry, are incomparably more loaded with value than the implements used in handicrafts and manufactures.
In the first place, it must be observed that the machinery, while always entering as a whole into the labour-process, enters into the value-begetting process only by bits. It never adds more value
? 265 Chapter 15
than it loses, on an average, by wear and tear. Hence there is a great difference between the value of a machine, and the value transferred in a given time by that machine to the product. The longer the life of the machine in the labour-process, the greater is that difference. It is true, no doubt, as we have already seen, that every instrument of labour enters as a whole into the labour-process, and only piece-meal, proportionally to its average daily loss by wear and tear, into the value- begetting process. But this difference between the instrument as a whole and its daily wear and tear, is much greater in a machine than in a tool, because the machine, being made from more durable material, has a longer life; because its employment, being regulated by strictly scientific laws, allows of greater economy in the wear and tear of its parts, and in the materials it consumes; and lastly, because its field of production is incomparably larger than that of a tool. After making allowance, both in the case of the machine and of the tool, for their average daily cost, that is for the value they transmit to the product by their average daily wear and tear, and for their consumption of auxiliary substance, such as oil, coal, and so on, they each do their work gratuitously, just like the forces furnished by Nature without the help of man. The greater the productive power of the machinery compared with that of the tool, the greater is the extent of its gratuitous service compared with that of the tool. In modern industry man succeeded for the first time in making the product of his past labour work on a large scale gratuitously, like the forces of Nature. 24
In treating of Co-operation and Manufacture, it was shown that certain general factors of production, such as buildings, are, in comparison with the scattered means of production of the isolated workman, economised by being consumed in common, and that they therefore make the product cheaper. In a system of machinery, not only is the framework of the machine consumed in common by its numerous operating implements, but the prime mover, together with a part of the transmitting mechanism, is consumed in common by the numerous operative machines.
Given the difference between the value of the machinery, and the value transferred by it in a day to the product, the extent to which this latter value makes the product dearer, depends in the first instance, upon the size of the product; so to say, upon its area. Mr. Baynes, of Blackburn, in a lecture published in 1858, estimates that
--each real mechanical horse-power25 will drive 450 self-acting mule spindles, with preparation, or 200 throstle spindles, or 15 looms for 40 inch cloth with the appliances for warping, sizing, &c. ?
In the first case, it is the day's produce of 450 mule spindles, in the second, of 200 throstle spindles, in the third, of 15 power-looms, over which the daily cost of one horse-power, and the wear and tear of the machinery set in motion by that power, are spread; so that only a very minute value is transferred by such wear and tear to a pound of yarn or a yard of cloth. The same is the case with the steam-hammer mentioned above. Since its daily wear and tear, its coal- consumption, &c. , are spread over the stupendous masses of iron hammered by it in a day, only a small value is added to a hundred weight of iron; but that value would be very great, if the cyclopean instrument were employed in driving in nails.
Given a machine's capacity for work, that is, the number of its operating tools, or, where it is a question of force, their mass, the amount of its product will depend on the velocity of its working parts, on the speed, for instance, of the spindles, or on the number of blows given by the hammer in a minute. Many of these colossal hammers strike seventy times in a minute, and Ryder's patent machine for forging spindles with small hammers gives as many as 700 strokes per minute.
Given the rate at which machinery transfers its value to the product, the amount of value so transferred depends on the total value of the machinery. 26 The less labour it contains, the less value it imparts to the product. The less value it gives up, so much the more productive it is, and
? 266 Chapter 15
so much the more its services approximate to those of natural forces. But the production of machinery by machinery lessens its value relatively to its extension and efficacy.
An analysis and comparison of the prices of commodities produced by handicrafts or manufactures, and of the prices of the same commodities produced by machinery, shows generally, that, in the product of machinery, the value due to the instruments of labour increases relatively, but decreases absolutely. In other words, its absolute amount decreases, but its amount, relatively to the total value of the product, of a pound of yarn, for instance, increases. 27
It is evident that whenever it costs as much labour to produce a machine as is saved by the employment of that machine, there is nothing but a transposition of labour; consequently the total labour required to produce a commodity is not lessened or the productiveness of labour is not increased. It is clear, however, that the difference between the labour a machine costs, and the labour it saves, in other words, that the degree of its productiveness does not depend on the difference between its own value and the value of the implement it replaces. As long as the labour spent on a machine, and consequently the portion of its value added to the product, remains smaller than the value added by the workman to the product with his tool, there is always a difference of labour saved in favour of the machine. The productiveness of a machine is therefore measured by the human labour-power it replaces. According to Mr. Baynes, 2 operatives are required for the 450 mule spindles, inclusive of preparation machinery,28 that are driven by one- horse power; each self-acting mule spindle, working ten hours, produces 13 ounces of yarn (average number of thickness); consequently 21/2 operatives spin weekly 365 5/8 lbs. of yarn. Hence, leaving waste on one side, 366 lbs. of cotton absorb, during their conversion into yarn, only 150 hours' labour, or fifteen days' labour of ten hours each. But with a spinning-wheel, supposing the hand-spinner to produce thirteen ounces of yarn in sixty hours, the same weight of cotton would absorb 2,700 days' labour of ten hours each, or 27,000 hours' labour. 29 Where blockprinting, the old method of printing calico by hand, has been superseded by machine printing, a single machine prints, with the aid of one man or boy, as much calico of four colours in one hour, as it formerly took 200 men to do. 30 Before Eli Whitney invented the cotton gin in 1793, the separation of the seed from a pound of cotton cost an average day's labour. By means of his invention one negress was enabled to clean 100 lbs. daily; and since then, the efficacy of the gin has been considerably increased. A pound of cotton wool, previously costing 50 cents to produce, included after that invention more unpaid labour, and was consequently sold with greater profit, at 10 cents. In India they employ for separating the wool from the seed, an instrument, half machine, half tool, called a churka; with this one man and a woman can clean 28 lbs. daily. With the churka invented some years ago by Dr. Forbes, one man and a boy produce 250 lbs. daily. If oxen, steam, or water, be used for driving it, only a few boys and girls as feeders are required. Sixteen of these machines driven by oxen do as much work in a day as formerly 750 people did on an average. 31
As already stated, a steam-plough does as much work in one hour at a cost of three-pence, as 66 men at a cost of 15 shillings. I return to this example in order to clear up an erroneous notion. The 15 shillings are by no means the expression in money of all the labour expended in one hour by the 66 men. If the ratio of surplus labour to necessary labour were 100%, these 66 men would produce in one hour a value of 30 shillings, although their wages, 15 shillings, represent only their labour for half an hour. Suppose, then, a machine cost as much as the wages for a year of the 150 men it displaces, say ? 3,000; this ? 3,000 is by no means the expression in money of the labour added to the object produced by these 150 men before the introduction of the machine, but only of that portion of their year's labour which was expended for themselves and represented by their wages. On the other hand, the ? 3,000, the money-value of the machine, expresses all the
? 267 Chapter 15
labour expended on its production, no matter in what proportion this labour constitutes wages for the workman, and surplus value for the capitalist. Therefore, though a machine cost as much as the labour-power displaced by it costs, yet the labour materialised in it is even then much less than the living labour it replaces. 32
The use of machinery for the exclusive purpose of cheapening the product, is limited in this way, that less labour must be expended in producing the machinery than is displaced by the employment of that machinery, For the capitalist, however, this use is still more limited. Instead of paying for the labour, he only pays the value of the labour-power employed; therefore, the limit to his using a machine is fixed by the difference between the value of the machine and the value of the labour-power replaced by it. Since the division of the day's work into necessary and surplus labour differs in different countries, and even in the same country at different periods, or in different branches of industry; and further, since the actual wage of the labourer at one time sinks below the value of his labour-power, at another rises above it, it is possible for the difference between the price of the machinery and the price of the labour-power replaced by that machinery to vary very much, although the difference between the quantity of labour requisite to produce the machine and the total quantity replaced by it, remain constant. 33 But it is the former difference alone that determines the cost, to the capitalist, of producing a commodity, and, through the pressure of competition, influences his action. Hence the invention now-a-days of machines in England that are employed only in North America; just as in the sixteenth and seventeenth centuries, machines were invented in Germany to be used only in Holland, and just as many a French invention of the eighteenth century was exploited in England alone. In the older countries, machinery, when employed in some branches of industry, creates such a redundancy of labour in other branches that in these latter the fall of wages below the value of labour-power impedes the use of machinery, and, from the standpoint of the capitalist, whose profit comes, not from a diminution of the labour employed, but of the labour paid for, renders that use superfluous and often impossible. In some branches of the woollen manufacture in England the employment of children has during recent years been considerably diminished, and in some cases has been entirely abolished. Why? Because the Factory Acts made two sets of children necessary, one working six hours, the other four, or each working five hours. But the parents refused to sell the --half-timers? cheaper than the --full-timers. ? Hence the substitution of machinery for the --half- timers. ? 34 Before the labour of women and of children under 10 years of age was forbidden in mines, capitalists considered the employment of naked women and girls, often in company with men, so far sanctioned by their moral code, and especially by their ledgers, that it was only after the passing of the Act that they had recourse to machinery. The Yankees have invented a stone- breaking machine. The English do not make use of it, because the --wretch? 35who does this work gets paid for such a small portion of his labour, that machinery would increase the cost of production to the capitalist. 36 In England women are still occasionally used instead of horses for hauling canal boats37, because the labour required to produce horses and machines is an accurately known quantity, while that required to maintain the women of the surplus-population is below all calculation. Hence nowhere do we find a more shameful squandering of human labour-power for the most despicable purposes than in England, the land of machinery.
Section 3: The Proximate Effects of Machinery on the Workman
The starting-point of modern industry is, as we have shown, the revolution in the instruments of labour, and this revolution attains its most highly developed form in the organised system of
?
